Lifeboat Foundation

A Camcopter S-100 drone made the first commercial drone delivery to an offshore oil platform in late August and it might be the beginning of a major industry. The helicopter drone flew a 3D printed part from Norway to a rig located about 60 miles off the coast. The flight was conducted without any special airspace adjustments and the drone was just part of the traffic servicing the oil fields. The drone also did an exterior inspection of the drilling platform and performed a simulated search and rescue drill with the rig’s standby vessel.

Of course, the oil companies are keeping a close eye on the drone developments because hauling freight and supplies to the rigs by drone could not only be a lot cheaper, but also safer. There are also several major helicopter companies that have oilfield supply as their core business watching the new initiatives. Servicing oil platforms is a multibillion-dollar business and also one of the most dangerous forms of commercial flying. Nordic Unmanned, which flew the first drone flight, says drones are a viable alternative to many missions now flown by big, expensive helicopters. “This marks the beginning of a new chapter within unmanned logistics,” spokesman Pål Kristensen said.” The technology is proven and robust enough to implement in large scale and reduces the risk cost and environmental footprint drastically.”

Unlike every other AM technology, their process prints the entire object at once. The researchers published the paper in the journal Nature Communications.

We can print houses now. And windmills. And swimming pools.

This 3D-printed bunny could be the future of data storage via Seeker.

This is my second video presentation on the topic of GEO space-based solar power (astroelectricity). This was also given via video at a conference in Portugal on 22 Aug 2020. After a brief introduction to astroelectricity, the 24-minute presentation addresses how global astroelectricity will enable most of the 17 UN Sustainable Development Goals to be addressed and, especially, how affordable middle-class housing can be built. We are living in an exciting time (in a positive sense) where emerging technologies will enable us to push through these difficult times. The key is to undertake an orderly transition from fossil carbon fuels to astroelectricity and not be sidetracked by poorly developed “solutions” such as the Paris Climate Agreement and the Green New Deal.

The world needs a peaceful, orderly plan to transition from fossil carbon fuels to globally decentralized sustainable energy sufficient to enable worldwide middle-class prosperity. Nuclear power, wind power, and ground solar power—“solutions” often tied to the Green New Deal—cannot practically achieve this. Astroelectricity, generated in space by space-based solar power, can meet this need. This presentation builds on the “(Em)powering World Peace and Prosperity Using Astroelectricity” to discuss the global benefits that will arise from transitioning to astroelectricity.

Continue reading “Enriching humanity using astroelectricity” »

This groundbreaking technique might be used to replace human organs with lab-grown versions 😮.

Using nothing but light and bioink, scientists were able to directly print a human ear-like structure under the skin of mice. The team used a healthy ear as a template and 3D printed a mirror image of that ear—tissue layer by tissue layer—directly onto the back of a mouse.

All without a single surgical cut.

If you’re thinking that’s super creepy, yeah…I’m with you. As a proof-of-concept, however, the team shows that it’s possible to build or rebuild tissue layers, even those as intricate as an ear, without requiring surgical implant. This means that it could one day be possible to fix an ear or other surface tissue defects—either genetic or from injuries—directly at the injury site by basically waving a sophisticated light wand.

The embryos, which were not allowed to develop past 28 days of age, move researchers a small step closer to perhaps growing human organs for medical transplant.

Every hour, six people in the United States are added to the national waiting list for organ transplants—and each day, 22 people on the list die waiting. In the U.S. alone, more than a hundred thousand people need heart transplants each year, but only about 2,000 receive one.

In response, researchers are working to artificially expand the organ supply. Some are trying to 3D print organs in the lab. Others are working on artificial, mechanical organs. And some are making chimeras—hybrids of two different species—in the hopes of growing human organs in pigs or sheep.

In just two years a robotic device that prints a patient’s own skin cells directly onto a burn or wound could have its first-in-human clinical trials. The 3D bioprinting system for intraoperative skin regeneration developed by Australian biotech start-up Inventia Life Science has gained new momentum thanks to major investments from the Australian government and two powerful new partners, world-renowned burns expert Fiona Wood and leading bioprinting researcher Gordon Wallace.

Codenamed Ligō from the Latin “to bind”, the system is expected to revolutionize wound repairs by delivering multiple cell types and biomaterials rapidly and precisely, creating a new layer of skin where it has been damaged. The novel system is slated to replace current wound healing methods that simply attempt to repair the skin, and is being developed by Inventia Skin, a subsidiary of Inventia Life Science.

“When we started Inventia Life Science, our vision was to create a technology platform with the potential to bring enormous benefit to human health. We are pleased to see how fast that vision is progressing alongside our fantastic collaborators. This Federal Government support will definitely help us accelerate even faster,” said Dr. Julio Ribeiro, CEO, and co-founder of Inventia.